Studio manual

1.1 Install the studio and sign in · 5 min

The Studio runs on your computer. Your account syncs settings, scripts, saved audio and provider keys; avatar and video files remain local.

1. Download Go Live Plus from the Downloads page — macOS or Windows.
2. macOS: drag it into Applications, then right-click the app and choose Open the first time (it is not notarised by Apple yet). Windows: run the installer and choose More info → Run anyway if SmartScreen appears.
3. The app shows a short code and opens your browser.
4. Approve the code on the device page. The computer stays signed in until you revoke it.
5. The plan badge in the app should now match the plan shown here.

Installer size varies by operating system. Check the download page for size and requirements; sign-in and online voice/AI providers require internet access.

1.2 Create your digital human · 20 min

One short video becomes an avatar that can say anything.

1. Record 15–20 seconds of yourself looking at the camera and talking normally.
2. Hold the head fairly still, keep the face lit evenly, and avoid hair across the mouth.
3. Vertical 720×1280 matches TikTok and Facebook without cropping.
4. Upload it on the Avatars page. Processing takes a few minutes and runs on your own machine.
5. When it says Ready, the avatar can be picked by any live host.

Avatar and video processing runs on your computer. Saved audio can sync to your account; text and audio go to your chosen voice/AI providers when required.

1.3 Set up a live host · 10 min

A host is the avatar, the voice, and the personality that answers comments.

1. Open Live Hosts in the app and create one.
2. Pick the avatar you made.
3. Pick a voice. Paste your ElevenLabs key to use cloned voices, or use the built-in Edge voices for free.
4. For a voice that is not in your ElevenLabs account, use “Paste a voice ID” — a raw ID or the voice page URL both work.
5. Write the personality: who the host is, how it speaks, what it must never say.
6. Press Test to hear a line before going anywhere near a live.

2.1 The Set up live page · 5 min

Eight steps with a status each: host & voice, face, products, script, FAQ, output, rehearsal, AI badge.

1. Open Set up live in the sidebar. Green is done, yellow is advice, red blocks Go live.
2. Press Fix on any step: the fix opens inside the step — pick the host, switch products on, pick the script, choose where the live goes.
3. Choose the room type on the left: Avatar host, Pre-recorded, Real camera + AI voice, Q&A assistant only, or Multi-host.
4. Set the planned length. The script's depth is judged against it; under 60 % it sounds like a recording.
5. The script step shows unique minutes, one-pass minutes and whether a checkout unit exists.

Real camera + AI voice and Q&A assistant only are voice-only: your camera is the picture, the AI is heard through a hidden output link. Lipsync on a live webcam is not available yet.

2.2 The sheet before Go live · 2 min

Go live always opens a short sheet first: script depth, checkout unit, AI badge, rehearsal, output, memory, quality, planned length.

1. Press Go live in the console or on Set up live.
2. Read the rows. Red blocks; yellow is advice (a short script, no rehearsal, low memory).
3. Rehearse first turns the same click into a rehearsal. Go live starts the live; the script starts 8 seconds later on its own.
4. The output link for TikTok LIVE Studio appears under Advanced as soon as the live runs; paste it once as a Browser source.

2.3 The console while live · 4 min

The Now strip: who is speaking, which scene and unit, what comes next, when the live is planned to end.

1. Pause script / Next unit (keys P and N) sit on the strip; Answer at the next sentence lets buying questions cut in at a sentence end.
2. Quick buttons queue a unit after the current one: Urgency + CTA, Re-entry hook, Checkout demo. Scheduled lines show beside them.
3. Take over (key T) types a line the host says next; Push to talk (Space) uses your voice. Product card switches the card.
4. Answered / greeted counts update live. Two minutes before the planned end the strip warns; with End on its own on, the live stops a minute after.

2.4 The report after the live · 1 min

Duration, script units played and covered, loops, questions answered, unanswered questions, greetings sent.

1. End live shows the report; the last ten are kept in data/reports.
2. Unanswered questions link to the FAQ inbox — answer them there and the host knows next time.
3. No sales or GMV figures: the engine cannot see orders, so it never invents them.

2.5 End with a rehearsal · 2 min

The same live with no viewers and no hours counted. Thirty seconds marks the Rehearsal step done for a week.

1. Press Rehearse on Set up live (or Rehearse first on the sheet).
2. Type a viewer comment in the box above the queue and hear the host answer; try a price question and a question it cannot know.
3. Press Next unit once to hear the script move on; open the Products tab and show a card.
4. End the rehearsal: the report appears, and Set up live shows the Rehearsal step green. Now Go live.

Demo traffic (ten canned comments) is a switch in the rehearsal box; it is off unless you turn it on.

3.1 Save a second host, then add it to the main host · 3 min

An avatar is a face asset. A host is a saved name, avatar, voice and personality.

1. Open Studio → Hosts → New host. Choose a distinct name, a prepared local avatar, voice, language and personality; click Save host. Repeat for the second host if needed.
2. Select the main host again. Enable Go live with co-hosts, click Add co-host and select the second saved host.
3. Set the role, Answers in languages and Owns products. Leave Voice only unchecked to show the avatar picture.
4. Click Save co-hosts. This is separate from Save host. If the list is empty, create and save a second host first; two library avatars do not create two hosts.

Maximum: one main host plus two co-hosts. A prerecorded-mode co-host uses voice only. Smooth dual-HD output is not guaranteed on every computer.

3.2 Arrange each avatar’s position, size and background · 3 min

The custom stage is saved against the main host.

1. Click Open Multi-host Studio. Choose Aspect: 9:16, 16:9 or 1:1 before starting a session.
2. Select an avatar outline. Drag to move or pull the blue corner to resize. Adjust Crop, layer and Lock as needed; use Undo / Redo to correct changes.
3. The top-bar Background colour belongs to the whole stage. For one host’s background, select that host and use This avatar background.
4. Original preserves the source video. Chroma key removes the selected colour. Auto remove (local) separates the person on your computer; inspect hair, hijab, hands and products for cut-outs.
5. Click Save setup. The editor previews real prepared avatar frames, not moving lips; check motion in Rehearsal.

3.3 Set script speakers and conversation mode · 3 min

Start with a predictable flow before adding automatic dialogue.

1. Choose Script + Q&A for scripts and viewer answers without automatic banter or follow-ups.
2. Choose Hybrid to allow short dialogue between script units and a one-line follow-up according to your settings. Start with infrequent dialogue; hosts take turns speaking.
3. In scripts, choose Who speaks for each unit or variant. Alternatively write Name: line, for example Mei: Let’s look at this product. Names must match saved hosts.
4. Check product facts, prices and stock before the session. A role such as Product expert divides the work; it does not automatically verify facts.
5. Save co-hosts, then rehearse the script with the same main host.

3.4 Test who answers a question · 3 min

Auto follows name → product → expert → main-host rules.

1. Under Who answers viewers’ questions, choose Auto for the default rules, or select main host, take turns, by product or by language if that suits your session.
2. With Auto, an explicitly named host is selected first. Next comes a recognised product and its assigned host. Recognised usage, ingredient or size questions may go to the expert; otherwise the main host answers.
3. In rehearsal, test a question naming a host, a question about the co-host’s assigned product, and a general question. Check both the selected speaker and its voice.
4. If the wrong host answers, check names, product assignments and routing settings. Selection uses rules and text matching; it does not perfectly understand every intention.

3.5 Match preview, output link and RTMP · 3 min

One session produces one aspect ratio shared by all outputs.

1. Before rehearsal, choose Aspect in Multi-host Studio and Save setup. Use 9:16 for portrait, 16:9 for landscape or 1:1 for square.
2. In OBS Browser Source, match width and height to the output. 720p examples: 720×1280, 1280×720 or 720×720. For 1080p, use the corresponding actual 1080p output dimensions.
3. Start rehearsal with the same main host. Preview, output link, recording and RTMP frames share the stage; the receiving platform can still letterbox or crop.
4. During an active custom-stage session, use Console → Hosts → Edit stage → Apply to live to change position, size, crop or background within the same aspect. Save setup alone does not change the running session.
5. To change aspect or switch between a custom stage and a preset, stop streaming and recording, end the session, then start a new one after saving the setup.

3.6 Check before going live and when moving computers · 3 min

Rehearsal checks assets, voices and performance on the broadcasting computer.

1. Start with two Standard-quality hosts. Check alternating lines, answers, voices, lips, avatar edges and performance. Reduce hosts or background processing if the computer is overloaded.
2. Sign in to the same account and organisation on web and desktop. Scripts, host metadata, voice choices, stage setups and saved audio sync; provider keys are encrypted at rest on the server.
3. Avatar and prerecorded video files remain local. On a second computer, import/prepare the right assets or select an available local avatar before rehearsal. A synced asset name is not the video file.
4. Let sync finish before switching computers. If a version conflict or audio quota issue appears, check its status rather than assuming every file is available.
5. Once rehearsal and platform output look right, choose Go live yourself. The AI badge remains visible.

Dual-HD performance and long sessions are not guaranteed on every computer. A visible prerecorded co-host plus avatar composite is not supported.

4.1 Add products the host can sell · 10 min

Products give the AI its facts — price, stock, sizes — and give the viewer a card on screen.

1. Open My Products and add each item with a photo, price and short description.
2. Fill in the keywords a customer would actually type: the brand, the nickname, common misspellings.
3. In the Studio, step 3 “Products & promotion”, switch on the items you are selling in this live. Max 10 — only those are in the host's knowledge.
4. Turn on “Place the card on the preview” to show the product card on screen. Drag it to move, pull the red corner to resize.
5. The host can raise a card by itself when its answer mentions that product, and you can always force one up or take it down by hand.

The AI only knows what you write here. An empty description makes it invent details, and invented prices are the fastest way to a refund.

4.2 Promotion audio: where to switch it on · 8 min

Lines the host says on its own when nobody is asking anything — in its own voice, lipsynced like any answer.

1. First make the lines: sidebar → Promotion Audio → New. Give it a name, choose the host that speaks it, and type one line per row (Add line). Add pause inserts a silence of the length you set.
2. Set the shortest and longest pause (20 and 60 seconds by default). The host waits a different length each time, which is what stops it sounding automated.
3. Press Save, then Generate the audio. Wait for the badge to say Ready — a promotion that has not been generated does not appear in the Studio.
4. Now go to the Studio → step 3 “Products & promotion” → the “Promotion audio” box.
5. Choose your promotion in the dropdown (it reads “Off” until you do), then tick “Say these between answers”. That is the switch.
6. Go live. The host reads one line whenever it has been quiet — it never speaks over an answer.

The box only appears in Avatar Live - Lipsync mode. A prerecorded clip already has someone talking in it, so a promotion would be two voices at once.

4.3 Read live comments · 10 min

TikTok is read by the studio itself. Facebook, YouTube and Instagram come through the Chrome extension.

1. TikTok: in the Studio, step 4 “Read comments”, paste your TikTok username and press Connect. No extension needed.
2. Facebook / YouTube / Instagram: install the extension from the Downloads page — unzip it, open chrome://extensions (Edge: edge://extensions), turn on Developer mode, click Load unpacked and choose the unzipped folder.
3. Keep the studio running on the same computer, open your live page in that browser, then pick the tab in the extension side panel and click Connect reader.
4. Comments land in the conversation with their platform badge, and the host answers them by priority: buying questions first, then questions, then chatter.
5. Turn auto-reply off at any time and the comments still arrive — the host just stops answering by itself.

The extension talks only to the studio on your own computer, over localhost. Comments are not sent to our servers.

5.1 TikTok LIVE Studio · 10 min

TikTok does not take a push, so the studio gives you a link to add as a browser source.

1. In the Studio, press Go live, then copy the output link that appears under step 2.
2. In TikTok LIVE Studio, add a Browser source and paste the link.
3. Set the size to 1080×1920 and let it fill the canvas.
4. The link follows the live host, so it stays the same tomorrow and only has to be pasted once.

If it says “waiting for live stream”, nothing is live in the studio yet. Press Go live there first — the link is a window onto a running session, not a way to start one.

5.2 Facebook, YouTube, Instagram and Twitch · 10 min

These four take a direct push from the studio — paste the stream key once and it is remembered.

1. On the platform, create a live video and choose “streaming software”. Copy the stream key (Facebook and custom servers also give a server URL).
2. In the Studio, step 2 “Push to platforms”, paste the key into that platform's row and press Push.
3. Press Go live in the studio first, wait for the platform's own preview to show video, then press Go live on the platform itself.
4. “Push to every platform with a key” starts all of them at once; Stop all ends them together.

Start the stream in the studio first. Facebook ends a live that has no incoming video.

5.3 Several platforms at once · 5 min

One live can reach TikTok, Facebook and YouTube together.

1. Add each destination before going live.
2. Press Go live once. The same video and voice go everywhere.
3. Comments from every platform land in the same queue.

Each platform is one account slot. A live on three platforms uses three at once — Starter covers one, Pro covers two. Live hours are still counted once.

5.4 Pre-Record mode: your own clip answers the comments · 6 min

The clip keeps playing with its own sound. When the host answers, the clip's sound is muted and the mouth of the person in it says the answer in your host's voice — then the clip carries on.

1. Open Content → Pre-Records and upload your clip. Preparation starts on its own and runs in the background: Convert, Map face, Analyse speech, Mouth references, Check.
2. When ready, open the Lipsync editor. Green timeline ranges allow lipsync; red ranges block it. Review the automatic scan, adjust ranges as needed and save before rehearsal.
3. Try an answer: click a moment on the strip, type a line and press Try. You hear it in the host's voice and see the mouth in the clip say it — a rehearsal, never broadcast.
4. On the Hosts page set the host's Face to Pre-Recorded and pick the clip. Any voice works: Gemini, ElevenLabs, MeloTTS, Edge or OpenAI.
5. In the Live Console choose that host — the mode switches to Pra-rakam by itself. Rehearse first, then Go live.
6. While live, the Pre-Record chip shows this computer's profile, the frame rate and whether an answer is running. “Hold replies” keeps comments queued without answering, for a part of the clip you want untouched.

No “Okay, one sec” acknowledgement and no promotion audio in this mode: the clip already has a voice, and the original is muted only once per answer.

5.5 Recording a clip that lipsyncs well · 4 min

Ten minutes of care when you record decides how many answers move the mouth. Aim for 60 % or more green on the coverage strip.

1. Face the camera. Your face should fill at least a quarter of the frame height; frame from the chest up.
2. Keep hands, the microphone and the product away from your mouth — show the product beside your face, not in front of it.
3. One long take: no cuts, no zooms, no change of camera angle. Turning your head a little is fine; side profiles are skipped.
4. Pause between sentences. An answer starts in one of your pauses, so a clip with natural breaks answers sooner.
5. Quiet room, or a steady music bed. Your own voice is muted while the host answers and comes back at the next pause.
6. Even light on the face, no strong light behind you. One person in frame.
7. Record 720p–1080p at 25 or 30 fps, MP4 (H.264). Phone clips (HEVC) are converted for you during preparation.
8. 20–60 minutes is enough: the clip loops smoothly. Up to 4 hours is accepted.

Below 60 % usable the Pre-Records page says what to re-record. Grey parts of the strip still play — an answer there is heard with the mouth left as it is.

6.1 The video lags or drifts behind · 4 min

Almost always the computer, not the internet — and the app tells you when it is.

1. Look at the live preview: if an amber “PC busy” chip is showing, this computer cannot lipsync every frame and the app is already coarsening the mouth to keep the live in the present.
2. Close what else is running — especially browsers with many tabs, games and video editors.
3. A smaller avatar frame (720×1280 rather than 1080×1920) is the single biggest saving.
4. Push to fewer platforms at once; each one costs an encoder.
5. If the chip never appears but the picture still stutters at the viewer's end, that is upload bandwidth — lower the platform's bitrate or use a cable instead of Wi-Fi.

A live that drifts further behind the longer it runs is always the machine, never the network. The app keeps itself in real time by making the mouth coarser rather than letting the delay grow.

6.2 The voice sounds doubled · 2 min

You are hearing the preview and the stream at the same time.

1. Press Mute on the live preview in the studio.
2. That silences only your own speakers. The stream and the output link keep their audio.

6.3 It refuses to go live · 3 min

Almost always hours or account slots.

1. Check Usage: if hours are at zero, the plan is spent until the period rolls over.
2. Check accounts in use: another live already holds the slot. End it, or move up a plan.
3. If the plan says expired, renew it on the billing page.
4. If the app says the computer is not authorised, it was revoked — sign in again with a new code.

6.4 My products or settings disappeared · 3 min

The account holds a copy of everything. One button brings it back.

1. Sign in to the same account and organisation on web and desktop. Check account connection status and let sync finish.
2. Scripts, host/voice settings, co-host setups, saved audio and provider keys follow your account. Keys are encrypted at rest on the server.
3. Avatar and prerecorded video files stay on the original computer. Import or select local assets before rehearsing on another computer.
4. If a sync conflict appears, do not delete local work to force a download. Check the versions on both devices first.

6.5 My avatars disappeared · 2 min

They did not — the queue is not the library.

1. Restarting the app clears the build queue, which is what the top of the Avatars page shows.
2. Your finished avatars are in the list below it, read from disk.
3. If one is genuinely missing, it is still in the app's data folder and can be re-imported.

7.1 What is Go Live Plus · 2 min

The AI host, your computer, your account and an honest label

1. What it is
2. Three parts
3. Room to platform
4. Platforms

7.2 Download and install · 3 min

Mac and Windows installers, and the first-run warnings

1. Open Downloads
2. Pick an installer
3. First-run warnings

7.3 Sign in and link the app · 2 min

Approve the computer from the browser

1. Steps on the Downloads page
2. The code in the app
3. Computers signed in

7.4 System requirements and the system check · 3 min

Does your computer suit HD or Standard

1. Ready to go live panel
2. Read the cards
3. Pick the quality
4. HD or Standard

7.5 Studio tour · 3 min

Find every page from the sidebar

1. Live
2. Content
3. Settings

8.1 Plans and pricing · 3 min

Compare Mini to Business

1. See the plans
2. Switch RM / USD
3. Compare plans
4. In your dashboard

8.2 Team and roles · 2 min

Invite members as Admin, Operator or Viewer

1. Seats depend on your plan
2. Admin: runs the team, rooms and keys
3. Operator: goes live and edits content
4. Viewer: can only look

8.3 Usage and live hours · 2 min

Read live hours, platforms and daily bars

1. Only time connected to a platform counts
2. Preview and setup are free
3. Daily bars show hours per day
4. A 0 is a test account, not an error

9.1 Create a room · 2 min

One room for one shop or one show

1. Open Rooms
2. Type a name
3. Create room

9.2 Live sessions and Open Studio · 3 min

Room, live session, Studio: everything restored

1. Live sessions in a room
2. Add a live session
3. Open Studio

9.3 Room defaults · 2 min

Set the live type, host, product and script once

1. Open the defaults
2. Live type
3. Host, product, script
4. Save

9.4 Room types · 3 min

Five choices: which one is for you

1. The Room type panel
2. Which one?

9.5 Dashboard overview, sessions and reports · 2 min

Where each page lives

1. Overview
2. Live sessions
3. Reports

10.1 Create a host · 3 min

Avatar, voice and personality in one host

1. Host = avatar + voice + persona
2. Pick an avatar that is ready
3. Edge is free, no key needed
4. Save the host, then pick it in the Console

10.2 Choose a voice · 3 min

Five voice engines, and hear a sample

1. Edge: free, no key
2. MeloTTS: local, Malay
3. Gemini, ElevenLabs, OpenAI: need a key
4. Try it first in the Voice Lab

10.3 Tone and personality · 2 min

Persona, greeting and speaking style

1. Persona = instructions about the host style
2. The greeting is the opening line
3. Emotion, tone and register can be chosen
4. Save the host to use it

10.4 Clone your voice · 3 min

Voice sample, consent and plan limits

1. Record 20 to 30 seconds, at least 8
2. A quiet room, no music
3. Tick consent: it is your own voice
4. The number of clones depends on your plan

10.5 New avatar: record and build · 4 min

From a video clip to a ready avatar

1. A clip of 15 seconds to 2 minutes, one face
2. Look at the camera, even light, mouth uncovered
3. Tick consent and write your full name
4. Building takes a while, and you can close the page

10.6 Standard vs HD quality · 3 min

Where to choose, and what changes

1. Host: pick Automatic, HD quality or Standard
2. HD: clearer teeth and lips
3. A new avatar is built Standard first, HD after
4. Not recommended: the live uses Standard

10.7 Managing avatars · 2 min

Preview, rename and update

1. Preview before you pick
2. Three-dot menu: rename, primary, re-process, delete
3. Delete cannot be undone
4. Mouth blend mode: Blend is recommended

11.1 What Pre-record is and how to film · 3 min

Your clip keeps playing, only the mouth is redrawn

1. The idea
2. Open the guide
3. Filming tips
4. The target

11.2 Upload and prepare a clip · 4 min

Prepare the clip, then read the result

1. New clip
2. Read the tips
3. Prepare
4. Read the result

11.3 Review green and red areas · 3 min

Decide where the clip's mouth may be lipsynced

1. Open a ready clip
2. Read the strip
3. Pick a range
4. Mark it
5. Save the areas

11.4 Try an answer · 3 min

See and hear one sentence drawn onto your clip

1. Open a ready clip
2. Time and host
3. Type a sentence
4. Press Try
5. See the result

12.1 Create a product · 2 min

Give the host real facts to sell

1. The right name and price
2. The host only says what you type
3. Switch on In this live
4. Save, the card builds itself

12.2 Product card, keywords and FAQ · 3 min

Image, overlay card and product FAQ

1. Keywords show the card
2. FAQ gives fixed product answers
3. This image is only a sample
4. Save to render the card again

12.3 Script editor and variants · 4 min

Build a script from scenes and units

1. A script is scenes, a scene is units
2. One unit can hold many variants
3. {a|b} picks a phrase, [x|y] picks a word
4. Vary uses AI credit

12.4 AI script writer and tones · 4 min

Draft and long scripts with AI

1. Pick the product, language and style
2. Long script: 15 to 240 minutes
3. Tone changes how the host speaks
4. Real offer only, no invented urgency

12.5 Script: paste and depth meter · 3 min

Import text, recordings, read the depth meter

1. Paste text or a file, it is split by line
2. Recordings need the HD pack or a key
3. Unique content meter: aim for 60% and above
4. Add units or variants when the meter is low

12.6 Q&A pairs and safe mode · 4 min

Your own answers to viewer questions

1. One pair: group, ways to ask, answers
2. Try a comment before going live
3. Safe mode: answer only from Q&A and prices
4. Match strictness: higher means stricter

12.7 Starter packs and inbox · 3 min

Import the AI host and Objections packs, handle the inbox

1. AI Host pack: honest answers when asked if the host is AI
2. Objections pack: price, COD, shipping, size and returns
3. Edit the packs to match your shop policy
4. The inbox: Add or Ignore

12.8 Greetings and caps · 4 min

Greet viewers, per-minute caps and thank-you templates

1. Greet up to five names in one line
2. The per-minute cap stops the host chattering
3. Templates use {name}, {names}, {gift} and {count}
4. Press Save after changing

12.9 Scheduled and quick · 3 min

Timed reminders and one-tap buttons

1. Scheduled line: every N minutes
2. Give a label and a few variants
3. Quick buttons show in the Console
4. Press Save so it takes effect

12.10 Compliance check · 3 min

Warnings on scripts and compliance settings

1. A red warning on a risky line
2. Categories: off-platform, giveaway, claims, competitors, false urgency
3. Compliance settings are in Interactions
4. Rules for Malaysia and Southeast Asia are not confirmed

13.1 Set up live: the eight steps · 4 min

Read green, yellow, red and press Fix

1. Open Set up live
2. Read the progress
3. Press Fix
4. The rest

13.2 Script depth and planned time · 3 min

Why the script needs enough unique content

1. Depth meter
2. Planned length
3. Go live sheet

13.3 Output: TikTok LIVE Studio · 4 min

Paste one link as a Browser source

1. Pick TikTok LIVE Studio
2. Paste the link

13.4 Output: RTMP, Facebook, YouTube, Shopee, Lazada · 3 min

A URL and stream key, saved once

1. Pick a platform
2. Key in Advanced
3. Saved keys

13.5 Output: virtual camera · 3 min

For apps that accept only a camera

1. The Virtual camera option
2. How it works

13.6 AI-host badge and platform rules · 3 min

Why honesty matters

1. The AI badge step
2. Locked on
3. Platform rules

13.7 Platforms and saved keys · 2 min

Where the live goes, and where keys are remembered

1. Open Platforms
2. Saved stream keys
3. Add or change

14.1 Rehearsal · 4 min

Try a live for free before the real broadcast

1. Check Rehearsal
2. Start Rehearsal
3. Wait for the avatar
4. Type a question
5. End live

14.2 Console: Now strip, pause and take over · 4 min

You hold the controls

1. The Now strip
2. Pause script
3. Next unit
4. Take over
5. Say exactly this
6. Cut

14.3 Console: comment queue and auto answer · 4 min

Priorities, answer yourself and the Auto switch

1. Comment queue
2. Demo traffic
3. Priorities
4. Answer rules
5. Buttons on a row
6. The Auto switch

14.4 Console: Script, Products and Setup panels · 3 min

Switch scripts, turn products on, place the card

1. Script tab
2. Switch script
3. Products tab
4. Place the product card
5. Setup tab

14.5 The pre-go-live sheet · 3 min

Eight rows: red blocks, yellow advises

1. Open the sheet
2. Read the eight rows
3. Choose an action

14.6 Live health · 3 min

Read the strip above the console

1. Strip chips
2. Memory warning
3. Preview badge
4. Check the system

14.7 Keyboard shortcuts · 2 min

Control the live without touching the mouse

1. P: pause the script
2. N: next line
3. T: take over text
4. Space: press to talk
5. E: end live, with a confirmation

15.1 Read TikTok LIVE comments · 3 min

Connect by username, read only

1. TikTok LIVE comments
2. Username
3. Rehearsal with demo traffic
4. Auto answer

15.2 YouTube, Twitch and Facebook/Instagram comments · 4 min

Three ways to read viewer comments

1. Open Advanced
2. Auto answer
3. Twitch
4. Facebook and Instagram

15.3 Shopee: output only · 2 min

Video goes out to Shopee Live; Shopee comments are not read

1. What there is
2. Video over RTMP
3. Comments
4. What you can do

15.4 Translate scripts, Q&A and interactions · 4 min

One press, one copy in another language

1. Scripts
2. Pick a language
3. Without an AI key
4. Scene and unit
5. Q&A
6. Interactions

15.5 Keyword media triggers · 4 min

An image, clip or sound when a keyword is said

1. Media triggers
2. New rule
3. Placement
4. Try a sentence
5. Test in a rehearsal

16.1 Canvas: format, layers and preview · 4 min

Arrange what viewers see

1. Open the Canvas
2. Layers
3. Add text
4. Drag and resize
5. Lock, hide, reorder
6. Save

16.2 Named scenes and templates · 4 min

Several screen layouts, one press to switch

1. Scene bar
2. New scene
3. Switch scenes
4. Template gallery
5. My templates

16.3 Media library · 3 min

Your own images, clips and sounds

1. Media library
2. Upload files
3. Folders and tags
4. Trim a clip
5. Replace a file

16.4 Safe areas and the AI badge · 3 min

Guides, warnings and the AI host label

1. Safe-area guide
2. TikTok and Shopee
3. Stream to
4. Compliant portrait
5. AI host label

16.5 Live layers: comment, thanks, product card · 3 min

Layers that follow what happens in the live

1. Live layers
2. Viewer question
3. Thanks
4. Show live output
5. From the console

17.1 Second host and co-host · 3 min

Save Mira, then add her to Aily

1. New host
2. Avatar and voice
3. Save host
4. Co-hosts
5. Save co-hosts

17.2 Stage editor · 3 min

Arrange two avatars in one frame

1. Open the editor
2. Pick a format
3. Drag and resize
4. Crop
5. Save setup

17.3 Turns and routing · 3 min

Who answers, and when the other host chimes in

1. Conversation mode
2. Who answers
3. Other host adds
4. Host banter
5. Save

17.4 Multi-host output and check · 3 min

Pick Multi-host in Set up live and read the check row

1. Room type
2. Pick Multi-host
3. Read the check
4. Back to Avatar host

18.1 Session report · 3 min

Read the summary after End live

1. Sample comments
2. Type a question
3. End live
4. Read the report

18.2 Reports and export · 2 min

Filter 7, 30 or 90 days, open a report, export CSV

1. Filter 7, 30 or 90 days
2. Open a row for the session report
3. Only what Studio can measure
4. Export CSV for your own spreadsheet

18.3 Unanswered, now answered · 2 min

Close the loop: inbox to Q&A

1. After a live, check Questions to answer
2. Write the real answer, then press Add
3. That question is now answered instantly
4. Repeat after every live

19.1 What is the Developer API · 2 min

Comments in, host events out, custom RTMP

1. What it is
2. Events in
3. Host events out
4. Custom RTMP
5. Two routes

19.2 Send comments from your platform · 4 min

The local /dev/v1 bridge with curl

1. Address and token
2. Start a rehearsal
3. List sessions
4. Send a comment
5. Limits

19.3 MCP: connect AI tools to the Studio · 3 min

The AI prepares, you press Go live

1. What MCP is
2. Connect
3. 35 tools
4. AI prepares, you press
5. Limits

20.1 Video lags or drifts · 3 min

Almost always the computer, not the internet

1. Look at the health strip
2. The PC busy chip
3. Fix it

20.2 Double audio · 2 min

You hear the preview and the stream together

1. Find the sound button
2. Mute the preview

20.3 Low memory warning · 3 min

Read the Memory row and fix it

1. Open the Go live sheet
2. Read the Memory row
3. Fix it

20.4 Cannot go live · 3 min

Hours, slots, plan and computer

1. Check Account
2. Four usual reasons

20.5 Missing product or avatar · 3 min

Same account, wait for sync

1. The same account
2. Check the lists
3. What follows you

20.6 TikTok comments do not arrive · 3 min

The account must be live; the feed is unofficial

1. Open Advanced
2. The TikTok LIVE comments card
3. Read the status